Product Description
SB-A74-002ISO 9001 Factory recycled rubber
Product Description
? Made of 100% recycled rubber
? Long lasting and cost efficient
? Reduces speed to 2-5 mph
? High visibility at night
? Simple installation
? Product can be installed in sections to create varying lengths
? Will not warp, crack, chip or rot
? Can be installed on any road surface
? Resistant to ultraviolet light, moisture, oil, and extreme temperatures
? Temporary or permanent installation - Relocatable when resurfacing /
maintaining road surfaces; products can be stored and re-used
The Rubber Speed Hump can lower vehicle's speed when the pass by,
but at the same time the driver have no feeling of being hit. In the daytime,
its warning color which is yellow and black is eye-catching.
The hump is installed with a reflection that can reflect the bright in the evening,
safety of pedestrian and vehicle traffic requires improvement
Product Specificatio
The Speed Bumps are mainly used for city intersection, highroad crossing, toll gate,garden, village, parking lot,
and gas station, etc.It must be very useful to lower the traffic speed.It can lower vehicle's speed
when the car passes by, but at the same time the driver has no feeling of being hit.In the daytime, its warning color ,
yellow and black, is eye-catching,can easily catch attention.Also the bump is installed with a light reflection that can
reflect some bright light in the evening,
which can attract drivers' attention and enhance the security.
Installation Steps:
Step 1: To guarantee the life span of the speed hump, workers should smooth the road first before fixing.
Step 2: Put the speed humps in a straight line.
Step 3: Drill through the holes of the speed humps into the ground until 12cm deep.
Step 4: Clean up the holes and remove the dust, oil and debris from the holes.
Step 5: Knock the screws through the holes until the screws expand completely to make the speed humps firmly installed
Feel free to send us message if you have any question, please
){kind=link}